Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in West Hills, CA
Gate work in West Hills is not the same as gate work in other parts of the San Fernando Valley. The hillside lots, equestrian-zoned properties, and older gated estates here create repair and installation conditions that a flatland contractor rarely sees. We handle it all from home base in the west Valley – everything from rusted iron gates on 1970s ranches to swing operators on steep driveways. If your gate will not open or is grinding against its track, call us at (650) 719-7207 and we’ll send a background-checked technician who knows this neighborhood.
Why West Hills Homes Are Different
West Hills sits at the far western edge of the Valley, pressed against the Santa Susana Mountains. That position means three things for gate systems: heat, wind, and terrain. Summer temperatures swing hard between midday and night, which expands and contracts metal gates and loosens bolts over time. Santa Ana winds above 50 mph slam into hillside properties, bending gate panels, tearing latches, and blowing brush into tracks. And many West Hills driveways are sloped, so gate wheels, hinges, and roller bearings wear unevenly – a gate that slides fine on a flat street in Woodland Hills may bind on a grade here.
The housing stock adds another layer. Many West Hills properties were built between the 1960s and 1980s as equestrian estates or custom hillside homes with long driveways. Those gates are often heavy iron or steel on operators that have been in service for decades. Sprinkler overspray near landscaped yards eats into iron gates, and the dry, dusty environment clogs limit switches and corrodes wiring faster than you would expect. Add occasional power shutoffs during wildfire season, and many West Hills homeowners want battery backup and manual release systems that older gates simply do not have.
Styles & brands we work with





Our Main West Hills Services
Most calls we take in West Hills involve a gate that has stopped moving or a motor that works only part of the time. Here is how we approach each one.
Gate Repair in West Hills
West Hills gate repair usually means iron gates with worn hinges, bent panels from wind, or rust damage near sprinkler lines. Our technicians start by inspecting the full gate – wheels, track, hinges, post alignment, and the operator – then write up a price before any work begins. Sloped driveways here cause particular stress on bottom wheels, and we replace them with parts sized for the gate’s weight, not a generic match. Gate Repair in West Hills goes over the common failures and what a repair visit includes.

Gate Installation in West Hills
A new gate on a West Hills hillside property means measuring grade, accounting for wind load on tall panels, and choosing hardware that holds up to dry heat and dust. We install iron, steel, and wood gates matched to the driveway width and the operator, and we build in manual release access for power shutoff days. Most installs here are on slopes, so post footings and hinge alignment matter more than on flat ground. Gate Installation in West Hills explains the process and what we quote.

Gate Motor Repair in West Hills
Gate motor repair in West Hills often comes down to dust. Limit switches fail, circuit boards overheat in direct sun, and battery backup systems drain after repeated power shutoffs. We carry parts for the brands installed across the west Valley, so a motor that hums but will not move can usually be diagnosed on the first visit. Gate Motor Repair in West Hills covers motor replacement, battery backup, and operator adjustments in detail.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in West Hills
Our West Hills crews work on LiftMaster, Elite, Mighty Mule, and FAAC equipment most often, and we stock common replacement parts for all of them. See our brands for the full list. Because we train on these systems rather than learning on your gate, most motor work is done in a single visit.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in West Hills, CA
| Service | Typical range in West Hills |
|---|---|
| Gate repair (minor) | $150 – $350 |
| Gate repair (major) | $350 – $900 |
| Gate installation (standard) | $1,800 – $5,500 |
| Gate installation (custom/heavy) | $5,500 – $15,000+ |
| Gate motor repair | $180 – $450 |
| Gate motor replacement | $600 – $1,800 |
| Battery backup install | $350 – $850 |
| Manual release repair | $120 – $300 |
| Track/roller replacement | $200 – $700 |
| Hinge/weld repair | $150 – $500 |
| Remote/keypad programming | $65 – $150 |
Prices in West Hills push higher when a driveway is steep, a gate is oversized, or the operator needs custom mounting on stone or block pillars. Every quote is written down before work starts, so the number you approve is the number you pay. No exceptions.
Neighborhoods We Serve in West Hills
We cover all of West Hills, from the equestrian properties along Valley Circle Boulevard to the hillside streets off Roscoe and the gated communities near Bell Canyon and Platt Village. Our typical arrival window for West Hills calls is same-day or next day, depending on when you call and how many jobs are already on the schedule.
- Bell Canyon area
- Valley Circle corridor
- Platt Village
- Hillside estates above Roscoe
- Equestrian-zoned properties near the Santa Susana foothills
Service Area – Cities Near West Hills
Alongside West Hills, our crews regularly work in Canoga Park, CA, Woodland Hills, CA, Winnetka, CA, and Calabasas, CA. If your property sits close to a city line, call us and we’ll confirm which crew is scheduled for your area that day.
Serving West Hills, CA - Our Local Coverage Area
We’re based in the West Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in West Hills
Most West Hills calls are scheduled same-day when we hear from you before early afternoon, and next-day otherwise. Emergency calls – a gate stuck open or a car trapped inside – get priority. Call (650) 719-7207 and a live person will give you a straight answer on timing.
Repairs on an existing gate generally do not need approval. Replacing a gate or changing its height, material, or operator may require HOA review if your community has design rules. We can tell you what to ask your HOA before you start.
Yes. Battery backup installation is one of the most common requests we field in West Hills, especially after wildfire-season shutoffs leave gates dead. We can add backup power to most existing gate motors and show you how the manual release works before we leave. Call (650) 719-7207 for a free estimate.
If your gate is acting up in West Hills, call (650) 719-7207. A live person answers, we set a clear arrival window, and you get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Hills Customers Say
"Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B.