Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Tarzana
Gate installation in Tarzana runs $1,400 to $7,800 for most residential work, depending on gate type, length, motor brand, and whether the existing electrical circuit can support a new operator. That’s the honest range. A new single swing gate with a standard operator and fresh post footings typically lands between $1,800 and $3,400. We know Tarzana’s housing stock: mid-century ranches on the flatlands south of Ventura Blvd, hillside properties with steep gated driveways to the north, and a lot of original 1950s-70s iron and wood gates that need code-smart retrofitting rather than wholesale replacement. Call (650) 719-7207 and Lonnie Burke or a member of our crew will give you a straight answer on cost and timeline.
Key Takeaways:
- Written price delivered before any work starts. The number never moves at the door.
- Background-checked, uniformed technicians on every Tarzana job.
- Live-person phone coverage 24/7. No voicemail boxes.
- 365-Day Done Right Promise on every installation and repair.
Why Carver Gate Repair Woodland Hills Is Tarzana’s Preferred Gate Installation Company
Tarzana homeowners call us because old gates fail differently here than they do ten minutes away. A gate tech who’s never worked the hillside streets north of Ventura Blvd won’t know to check the electrical panel before touching the operator. Ours does. The Garrison Standard means every job gets a written price first, a written guarantee after, and a free second visit if something goes wrong inside the warranty window. That’s not a sales pitch. It’s the way Lonnie Burke has run crews since 2008.
We dispatch locally to Tarzana from our Los Angeles operations office. Response time to most Tarzana neighborhoods runs under 90 minutes for urgent calls. Our technicians work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, so there’s no finger-crossing when we arrive.
Styles & brands we work with
Automatic Gate Installation in Tarzana
Automatic Gate Installation in Tarzana means pairing the right motor with the gate that’s already there, or hanging a new gate and motor together when the old one is too far gone. A typical install includes setting or resetting posts, hanging the gate, mounting the operator, wiring a dedicated circuit if needed, and installing UL 325-compliant safety photocells and edge sensors. You’ll get a written quote before we touch anything, and the job is guaranteed for a full year.
Retrofitting Older Tarzana Operators
If the gate itself is solid but the opener is dead, we can often swap the operator and control board without replacing the gate. On 1960s-era homes north of Ventura Blvd, we check the circuit voltage at the operator first. Aging knob-and-tube panels often read low under load, which burns out new boards. We’ll run a dedicated 120V line when needed.
New Builds and Full Replacements
When the posts are rotted or the gate is warped beyond repair, replacement is the cheaper long-term answer. We set deeper concrete footings, hang the new gate square, and install the operator, photocells, and keypad entry. You approve the price before the concrete gets poured.
Gate Installation Services in Tarzana
Gate Installation Services in Tarzana cover the full range: driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. What you need in Tarzana depends on your lot. Flatland homes south of the boulevard generally have longer driveways and wider openings, so double swing or sliding gates are common. Hillside properties north of Ventura Blvd more often call for single swing gates that clear the slope without hitting gravel or grade changes.
Driveway and Double Gates
Double gates on Tarzana flatland homes run $2,800 to $7,800 installed, depending on width, material, and motor type. We handle the full pour: post footings, hinge alignment, operator, safety sensors, and keypad or intercom tie-in.
Pedestrian and Security Gates
A pedestrian gate with a magnetic lock or keypad runs $900 to $2,200 in Tarzana. Heavier security-grade steel with a welded frame goes higher. We’ll quote the real number before ordering anything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tarzana
We stock parts for the big names on Tarzana trucks: LiftMaster, FAAC, Elite, and Mighty Mule among them. If your old DoorKing board is dead and the gate is otherwise fine, we’ll swap in a replacement control board and new safety eyes without replacing the whole gate. If the operator is beyond repair, we usually recommend LiftMaster for Tarzana’s long driveways and sun exposure. The point is matching the right equipment to what’s already on the property.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Tarzana Homes
Tarzana’s mix of mid-century construction, dry heat, and hillside grades creates a fairly consistent set of failures. Here’s what we find most often:
- Obsolete control boards on 1950s-70s operators. These burn out after voltage drops from aging knob-and-tube panels. The gate sticks mid-travel and won’t respond to remotes. We trace the circuit and replace the board or run a new line.
- Hinge posts pulling loose or rotting. Tarzana’s winter rains soak older wood posts, and the gate sags. Misaligned safety photocells result. We reset posts in new concrete when the gate itself is still salvageable.
- Wood gates warping in dry heat. Flatland gates warp in Tarzana’s hot, dry summers and jam against guide rollers. Sometimes the frame can be resquared; sometimes the right call is a new steel gate that won’t move.
- Sensor failures after Santa Ana winds. Wind-blown debris shifts photocell alignment and the gate refuses to close. It’s usually a quick recalibration, but older sensor pairs often need replacing every few years.
Pricing for Gate Installation in Tarzana, CA
Here’s the honest spread for Tarzana work. Single swing gate with operator: $1,400 to $3,800. Double gate: $2,800 to $7,800. Sliding gate: $2,500 to $6,500. Pedestrian gate: $900 to $2,500. Motor-only replacement on an existing gate: $800 to $1,900 if the circuit and posts check out. Older Tarzana homes with knob-and-tube wiring sometimes add the cost of a dedicated 120V circuit run. You’ll get a written line-item quote before any work begins, and that number is the number you pay. Call (650) 719-7207 for a free estimate.
We Also Serve Cities Near Tarzana
Our Gate Installation team handles jobs across this part of the Valley, including Encino, Reseda, Woodland Hills, and Winnetka. If you’re in Tarzana, we’re already close. For full details on coverage and response times, see Gate Installation in Tarzana.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Tarzana
Sometimes, but only after a voltage check at the operator. Many 1950s-70s Tarzana gates are wired into knob-and-tube panels that read low under load, which will burn out a new control board quickly. If the reading holds steady, we connect to the existing circuit. If not, we run a dedicated 120V line. Call (650) 719-7207 and we’ll schedule the check.
In most Tarzana cases, the post has pulled loose and the gate itself is still good. We reset the post in deeper concrete, square the gate, and you’re back in service without buying a new gate. Replacement only makes sense when the iron is warped beyond repair or the hinges are wallowed out. We’ll show you the condition before recommending either path.
Yes. Any automatic gate installed in Tarzana must meet UL 325 safety requirements, which means a working pair of monitored photocells and edge sensors where required. We include them in every automatic gate installation quote. It’s not an upsell; it’s the code.
Yes, if the driveway has enough linear run for the gate to slide back. Hillside driveways often slope too steeply for a track-style slide gate, in which case a swing gate is the better answer. We’ll measure the grade and tell you straight which one works before you spend a dollar.
The hum usually means the motor is getting power but the gate is jammed, most often from a sensor knocked out of alignment by wind-blown debris, or a gear rack stripped after a warped gate jammed against the rollers. We fix both in Tarzana regularly. Call (650) 719-7207 and we’ll get a tech out to diagnose it.
Written by Lonnie Burke, Owner at Carver Gate Repair Woodland Hills, operating to The Garrison Standard since 2008.