Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Installation in Woodland Hills: What to Know First
DoorKing gate installation in Woodland Hills runs $1,850 to $5,600 for a complete system, depending on whether we’re mounting a new operator on an existing gate or setting posts and building the gate from scratch. Most installations take one to two days, and we always hand you a written price before any work starts, so the number you approve is the number you pay. This page is for homeowners who already own a DoorKing unit or want one installed, and who want a crew that actually knows the equipment.
If you’re looking at a boxed DoorKing operator sitting in your garage, or a gate that’s half-hung and stalled out, call us at (650) 719-7207. We’ll tell you straight what it takes.
How DoorKing Products Fail – and How We Fix Them
DoorKing builds solid operators, but every brand has its weak points. Here’s what we see repeatedly on DoorKing installs across Woodland Hills, from the Warner Center corridor up through the hillside streets off Mulholland.
- DoorKing 9150 slide operator drive gear wear. The helical drive gear on the 9150 starts to strip when the gate’s rollers have been neglected. Homeowners blame the operator, but the real problem is a binding gate overloading the gear. We replace the gear and service the rollers in the same visit, so the new gear doesn’t fail in six months.
- DoorKing 6002 swing operator limit switch misalignment. The 6002 uses mechanical limit switches that drift over time, especially on heavy double gates that slam against the stops. We’ll see the gate overshoot and bounce off the close stop, then kick back open. The fix is realigning the limit cams and adjusting the torque limiter, not replacing the board.
- DoorKing 9150 main board failures from brownouts. Southern California Edison and hillside service drops don’t always deliver clean power. We see boards on the 9150 and 9060 take hits during low-voltage events in the valley heat. On new installs, we recommend a surge suppressor and a dedicated circuit, which costs a fraction of a board replacement.
- DoorKing 6003 / 6004 swing arm binding on mis-set hinge posts. When a hinge post shifts in Woodland Hills clay soil, the gate leaf changes its swing arc and the operator arm fights the gate every cycle. That fight shortens the operator’s life. We re-set or shim the hinges before mounting the arm, so the operator isn’t working against a geometry problem.
- DoorKing 9345 overhead gate application mismatches. The 9345 is a slide operator, and we still get calls where someone hung it on a short canopy gate with no proper track. The gate skates, the chain sags, and the operator cooks itself. Correct placement and a proper chain idler solve it.
Styles & brands we work with





Our DoorKing Gate Installation Process
Here’s how a DoorKing install goes when we run it, the same way Lonnie Burke has run jobs across the San Fernando Valley for years.
- 1
Site walk. We check the gate, posts, clearance, power availability, and soil conditions. Clay-rich Woodland Hills soil moves posts over time, so we look for that before anything gets bolted down.
- 2
Written quote. You get a line-item price covering the operator mount, gate work, power run, and any loops or safety edges. This is the number. It doesn’t move.
- 3
Parts decision. We use DoorKing OEM parts where warranty matters, and quality aftermarket equivalents only where they’ll outlast the OEM specification and we tell you that plainly.
- 4
Install and wire. Operator mounted, chain or arm adjusted, limit switches set, loop detector installed, safety edges placed, remote controls programmed.
- 5
Full cycle test. We run the gate through 25 to 30 open-close cycles under load, then test the obstruction reversal and accessory devices.
- 6
Cleanup and guarantee. Site swept, parts boxes gone, and you get the 365-Day Done Right Promise in writing. If something’s not right within a year, we come back and make it right, no charge.
What DoorKing Gate Installation Costs in Woodland Hills
Here’s what we see for the common DoorKing scenarios in this market:
- DoorKing 9150 slide operator on existing gate: $1,850 to $3,200, including mounting, chain, receiver, and one standard remote.
- DoorKing 6002 swing operator on existing single swing gate: $2,100 to $3,600, depending on gate weight and whether we run 110v or need a solar option.
- New double swing gate with two 6002 operators: $4,200 to $7,800, including gate fabrication, posts set in concrete, operators, loops, and remotes.
- Complete slide gate package with post and track: $3,800 to $6,200 for a 12 to 16 foot gate.
The two biggest price drivers are gate weight and power availability. A $400 underground power run from the panel to the gate is cheap insurance compared to the board failures we see from cobbled-together extension cord power. Call (650) 719-7207 for a precise quote, it’s free.
See the difference
Before
After
Before
After
Before
AfterWhy Woodland Hills Homeowners Call Carver Gate Repair Woodland Hills for DoorKing Work
We’re an independent DoorKing service provider, not a DoorKing dealer, which matters one specific way: we work for you, not for a manufacturer warranty. Every technician dispatched is background-checked and in uniform. The price is written down before tools come out. And the 365-Day Done Right Promise means if a limit switch drifts or a gear whines inside a year, we’re back out at no charge and we’ll argue with ourselves, not with you.
We fix it right the first time, or we come back and fix it right.
DoorKing is our focus on this page, but our techs also work LiftMaster, Mighty Mule, and Ghost Controls systems, so when the neighbor’s gate goes down with a different brand, we’re already on the street.
FAQs
No, when installation follows the manufacturer’s torque and clearance specs, your DoorKing equipment warranty remains intact. We document every step and torque setting, and as an independent service provider we’re careful to install within the warranty terms, not around them. Call (650) 719-7207 and we’ll explain how we protect your warranty.
Most DoorKing slide and swing operator installs are done in one day, with a second day only if we’re building a new gate from scratch. On the first call we’ll give you a written install date, not a window, and we hold to it.
We default to DoorKing OEM parts for anything that affects operator function or warranty, and we use aftermarket only where it’s a genuinely better part, like a heavier-duty chain or a beefier safety edge. You’ll know which before we install it.
Yes, and that’s one of the more common calls we get in Woodland Hills. We’ll check whether your existing gate weight and post condition support the new model, then give you a written price for the full swap, labor and all. Estimates are free, call (650) 719-7207.
Call us and a technician returns. The 365-Day Done Right Promise covers it in writing, and if the repair fails inside the guarantee window, you get a second visit free, no charge and no argument.
Contact Carver Gate Repair Woodland Hills
DoorKing gate installation in Woodland Hills is the kind of job that goes wrong when someone rushes the details. We don’t rush. Call (650) 719-7207 for a free, written estimate, and you’ll know the price before we touch a single bolt.
Written by Lonnie Burke, Owner, Carver Gate Repair Woodland Hills at Carver Gate Repair Woodland Hills, serving Woodland Hills and nearby areas.