Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Canoga Park
A new driveway or pedestrian gate in Canoga Park typically costs between $2,800 and $9,500 installed, depending on the gate material, length, and whether you’re adding an operator. Most jobs take one to two days once the gate is fabricated or delivered. If you’re calling for Gate Repair in Canoga Park, we can usually have a tech out within 48 hours for a measure and a written quote. That quote is the price. It doesn’t move at the door. Call (650) 719-7207 and you’ll speak to a live person, not a voicemail tree.
Why Carver Gate Repair Woodland Hills Is Canoga Park’s Preferred Gate Installation Company
Canoga Park homeowners call us because the gate problems here aren’t the same as the ones in West Hills or Woodland Hills. We know the difference. Our techs have hung gates on Sherman Way, replaced operators near Canoga Park High School, and rebuilt vintage iron gates in the ranch-home blocks south of Roscoe Boulevard. We’ve seen what the Valley sun does to powder coat after ten summers. We’ve dug out footings where the original post was set in nothing but loose dirt.
Every Gate Installation job works on The Garrison Standard: written price before work starts, background-checked and uniformed technicians on site, and a 365-Day Done Right Promise in writing. If something isn’t right within a year, we return and fix it. No charge, no argument. Our crews clean the work area before they leave. That part isn’t optional.
Lonnie Burke runs the crew. He’s been doing gate work long enough to know that a 1950s ornamental gate deserves a different approach than a 2005 apartment slide gate. The standard stays the same. The method doesn’t.
Styles & brands we work with
Gate Installation Services in Canoga Park
Gate Installation Services in Canoga Park usually mean one of two things: replacing a gate that’s failed and can’t be economically repaired, or adding a gate where none existed. We handle both. A basic single-swing driveway gate made of steel or aluminum runs $2,800 to $5,200 in this market. A double swing gate is more, usually $4,500 to $8,000. Custom ornamental iron work, the kind that matches the scrollwork on older Canoga Park ranch homes, lands between $6,000 and $9,500. Pedestrian gates start around $1,400.
Driveway and Swing Gate Installation
We install swing gates that open inward or outward, on square post footings with rebar. A lot of Canoga Park’s original gates were set without rebar, which isn’t code now. When we replace a post, we pour it right. The gate gets hung, adjusted to clear the driveway grade, and tested through its full range of motion.
Sliding Gate and Security Gate Installation
Sliding gates work well on Canoga Park’s narrower driveways and at apartment complexes along Vanowen and Sherman Way. We install cantilever and track-style slide gates, set the rack, and wire the operator. For security gates at multi-family properties, we size the motor for the gate’s weight and cycle count, not the cheapest option.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Canoga Park
Electric Gate Installation in Canoga Park means adding an automated operator to either a new gate or an existing one that’s still structurally sound. The operator itself, installed, runs $1,800 to $3,800 depending on brand and gate type. A full package, gate plus operator plus safety edges and photocells, starts around $4,500 and can reach $10,500 for a heavy custom iron gate on a long drive.
Adding an Operator to an Existing Gate
Many Canoga Park homes have perfectly good gates with dead operators. Some of those operators are original to 1980s apartment buildings and predate modern UL 325 standards. We can retrofit a new operator onto the old gate, provided the hinge posts and gate leaf are sound. If the gate itself is sagging, the operator won’t fix it. The gate comes first.
New Gate Plus Operator
When we install both, we match the operator to the gate’s weight and daily cycle count. A heavy ornamental iron gate on a busy driveway needs more than a residential opener sized for a lightweight aluminum gate. We install safety edges, photocells, and a loop detector when the site calls for it. Every operator we install is wired to code and tested under load.
Trusted Brands We Service in Canoga Park
Our techs work on LiftMaster, FAAC, and Mighty Mule operators most often in Canoga Park, along with Elite and Viking units on the apartment and commercial side. Having parts for these brands locally means we aren’t waiting on a distributor in another county when a control board fails. If your Canoga Park property has an existing operator that still works, we can often match it to the same brand so the remotes and receiver stay compatible. If it’s an obsolete board, we’ll tell you before we recommend replacing it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Canoga Park Homes
- Rotted or shifted hinge posts. Original 1950s and 60s posts were often set without rebar and without a proper concrete footer. Through Canoga Park’s dry summers and wet winters, the footings crack, the post leans, and the gate drags. Sometimes we can reset the post. More often, we cut it out and pour a new footing.
- Obsolete control boards on apartment slide gates. Buildings from the 1980s through 2000s often have boards that predate current safety standards. They lack photocell inputs and fail entrapment tests. In many cases, the gate itself is fine. The answer is a new operator and a safety retrofit, not a whole new gate.
- Wood gate warping. The San Fernando Valley’s heat and low humidity pull moisture out of wood quickly. A wood gate that isn’t sealed or braced will warp within a few seasons. We see it routinely on Canoga Park’s older ranch properties. When we install wood gates now, we use kiln-dried stock and steel bracing.
- Mismatched ornamental work. When someone patched an original custom iron gate with a generic section from a supplier catalog, the finial pattern doesn’t line up. We hand-match scrollwork and finials where possible. If a section can’t be matched, we reproduce it through a local fabricator.
Pricing for Gate Installation in Canoga Park, CA
Here’s what you can expect to pay for gate work in Canoga Park. A pedestrian gate runs $1,400 to $3,000. A single driveway swing gate, steel or aluminum, runs $2,800 to $5,200. Double swing gates run $4,500 to $8,000. Custom iron gates with matched ornamental work run $6,000 to $9,500. Adding an operator to an existing gate runs $1,800 to $3,800. A slide gate for an apartment or commercial property starts around $5,500 and goes up with length, weight, and operator duty cycle.
The written quote we give you includes labor, materials, and any required permits. We don’t charge extra to come back during the guarantee period. Every price is agreed before work starts. That’s the point of The Garrison Standard.
Call (650) 719-7207 for a free estimate. We’ll measure, write the number down, and you decide.
We Also Serve Cities Near Canoga Park
Our crews cover Canoga Park and the surrounding San Fernando Valley communities. You’ll find us working in Gate Installation in Canoga Park one day and in Winnetka, West Hills, Woodland Hills, or Reseda the next. Call the same number and reach the same dispatch desk. The written pricing and the guarantee don’t change by zip code.
Serving Canoga Park, CA - Our Local Coverage Area
We’re based in the Canoga Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Canoga Park
You can often keep the original gate if the hinge posts are solid and the gate leaf hasn’t rotted or cracked. The operator mounts to a sound post. If the post leans or the footer is cracked, we replace the post and pour a new footing before mounting anything. Most original Canoga Park iron gates are heavy enough that the original gate can stay, but the operator must be sized for the gate’s actual weight. Call (650) 719-7207 and we’ll inspect it for free.
Canoga Park’s inland Valley climate swings harder than coastal Woodland Hills. Summers hit triple digits and winters bring short, wet periods. Metal gate leaves expand and contract. Wood gates warp. Post footings set without rebar crack as the clay soil shrinks and swells. Those movements loosen hinges and force the operator to work harder until something gives. It’s not maintenance. It’s the environment and the original construction. We account for it on every install.
Yes. When we extend or rebuild an original 1950s or 60s Canoga Park gate, we work with a local fabricator to match the existing finial pattern and scrollwork. Sometimes the original was hand-forged and the match needs to be close, not identical. We’ll tell you what’s achievable before you pay for the work. This kind of matching is standard for us on Canoga Park’s older ranch homes. It isn’t something a general contractor typically does.
In most cases, yes. A saw-cut loop can be installed by cutting a clean channel in the asphalt or concrete, laying the loop wire, and sealing the cut. It doesn’t require tearing up the whole driveway. The channel is narrow and we seal it with a proper backer rod and sealant. For Canoga Park apartment gates that need a loop for vehicle detection, this is a standard part of the job. Call (650) 719-7207 for a site assessment and a written price.
Replacing a single post footing on a swing gate in Canoga Park runs $900 to $2,200, depending on the size of the post, the depth of the footing, and whether the old concrete has to be broken out by hand. The price includes removing the old footing, setting the post in new concrete with rebar, and re-hanging the gate so it swings true. If the operator also needs to be re-set, that’s additional. We write the number down before we start.
We build and hang gates in Canoga Park every week. Call (650) 719-7207 and you’ll get a real person, a straight answer, and a written quote before you spend anything.
Written by Lonnie Burke, Owner at Carver Gate Repair Woodland Hills, serving Canoga Park and the San Fernando Valley.