Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Woodland Hills, CA
A pedestrian gate in Woodland Hills typically costs between $850 and $3,200 installed, depending on material, width, and whether it hangs from a post or rolls on a track. Most installations take one day, and we give you a written price before any work begins. If you need a walk gate that matches your existing driveway gate or stands on its own, call (650) 719-7207 and we’ll come measure it.
Carver Gate Repair Woodland Hills installs pedestrian gates as a focused part of our broader Gate Installation work. We’re not a general fencing contractor who happens to hang a gate now and then. Gates are the entire job. Every pedestrian gate we install carries the same written guarantee as our larger work: a full year, in writing, with a free second visit if anything fails inside that window.
When You Need Pedestrian Gate
Most homeowners in Woodland Hills call us for a pedestrian gate when one of these situations shows up:
- The existing walk gate sags or drags. In the clay-heavy soil around Ventura Boulevard and the hillside lots south of the 101, post footings shift over wet and dry seasons. A gate that scraped in the winter often won’t close at all by summer.
- You’re replacing a driveway gate and the walk gate no longer matches. A new aluminum driveway gate next to a rusted steel walk gate looks like a half-finished job.
- A delivery driver or pool contractor left the old gate hanging by one hinge. It happens more than you’d think. A bent hinge post or a stripped hinge weld means the gate needs to come down and get re-hung properly.
- You need a dedicated pedestrian entrance for safety or convenience. On lots where the driveway sits far from the front door, a separate walk gate keeps foot traffic off the vehicle path, especially on narrow hillside streets near Topanga Canyon Boulevard.
- The old pedestrian gate was never built for the weight it carries. Solid redwood gates hung on lightweight residential hinges sag within a few years. We see this regularly in the older neighborhoods around Warner Center.
Our Pedestrian Gate Process
Every pedestrian gate installation follows the same sequence. No shortcuts, no surprises at the end of the day.
- Site visit and measurement. We check the existing posts, the ground slope, and the clearance for swing or slide. If the posts are shot, we tell you before quoting, not after demolition.
- Written price. You get the number on paper before any work starts. Material, labor, hardware, and any post work are line items, not a lump sum we can inflate later.
- Gate selection and hardware matching. We install steel, aluminum, and redwood pedestrian gates. Hinges, latches, and closers are sized to the actual gate weight, not whatever is cheapest on the shelf.
- Installation and leveling. The gate gets hung, adjusted, and tested through a full open-close cycle. We check the latch engagement and the gap at the bottom so it clears the highest point of the walk.
- Cleanup and walkthrough. The site is left clean. You test the gate with us there. Then we hand you the written guarantee, good for a full year.
Every technician who shows up at your door is background-checked and uniformed. You’ll know who you’re letting onto the property before they step out of the truck. That’s part of how we operate at Carver Gate Repair Woodland Hills, and it’s been the standard since 2008.
Pedestrian Gate Pricing in Woodland Hills
Pedestrian gate pricing depends on three things: the material, the width, and whether the existing posts can carry the load. Here’s what we typically see in Woodland Hills:
- Steel pedestrian gate, 3 to 4 feet wide: $850 to $1,500 installed
- Aluminum pedestrian gate, standard height: $1,100 to $1,900 installed
- Redwood or cedar walk gate, custom width: $1,200 to $2,400 installed
- Pedestrian gate with new posts set in concrete: add $400 to $800 depending on post size and footing depth
- Self-closing hardware, lockable latch, or keypad integration: add $180 to $500
If the pedestrian gate is part of a larger gate installation project, the per-gate cost drops because we’re already on site with tools and materials. Call (650) 719-7207 for a free estimate, and we’ll give you a written price before you commit to anything.
Pedestrian Gate Hardware We Work With
Pedestrian gates don’t need much hardware to work well, but they need the right hardware. We stock and install hardware from LiftMaster, Elite, and Mighty Mule for walk gates that need a closer, a lock, or a keypad. For simple manual gates, we use heavy-duty hinges and latches that hold up to the dry heat and the winter rains Woodland Hills gets every year.
If your pedestrian gate has an electronic strike or a maglock tied to an existing gate motor system, we’ll match the hardware to the system that’s already installed. Mixing brands on an integrated gate setup causes more service calls than anything else we see.
Pedestrian Gate vs. Driveway Gate: What’s Different
Pedestrian gates are usually lighter and narrower than a driveway gate, but they fail for different reasons. A driveway gate wears out operators and wheels. A pedestrian gate wears out hinges and latches because people lean on it, kids swing on it, and delivery drivers shove it open with a shoulder.
In Woodland Hills, the bigger factor is the ground movement. The hillside lots around Mulholland Drive and the flatlands near the 101 both see post shifts, but the hillsides see it worse. We set pedestrian gate posts deeper and use more concrete than a standard fence company would, because a walk gate that rubs the ground in January will bind completely by August.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Woodland Hills?
A pedestrian gate in Woodland Hills typically costs $850 to $3,200 installed, with most standard steel or aluminum walk gates landing between $1,000 and $1,800. New posts, custom widths, and integrated locks push the number higher. Call (650) 719-7207 for a written estimate, no charge.
Can you install a pedestrian gate the same day?
In many cases, yes. If the existing posts are solid and the gate opening is a standard width, we can often measure, build, and hang a pedestrian gate in one visit. If posts need to be set in concrete, the job usually takes two days because the footing needs to cure before the gate gets hung.
Is it cheaper to repair or replace a pedestrian gate?
If the gate structure is sound and the problem is a bent hinge, a worn latch, or a shifted post, repair almost always costs less than replacement. If the frame is rusted through or the gate was undersized for its opening, replacement is usually the better use of your money. We’ll tell you which one we’d pick if it were our house, and the written price you get covers either path.
Do you install pedestrian gates that match an existing driveway gate?
Yes. We match material, color, and style as closely as the current gate market allows. For powder-coated aluminum driveway gates, we order pedestrian gates in the same finish from the same fabricator whenever possible. If you’re wondering how much gate installation costs, you’ll get a clear price for the matched set from day one. If you’re replacing both at once, you’ll get a matched set from day one.
Call (650) 719-7207 to schedule a free estimate for your pedestrian gate in Woodland Hills. We answer the phone around the clock, seven days a week, and you’ll get a written price before any work begins.
Written by Lonnie Burke, Owner at Carver Gate Repair Woodland Hills, serving Woodland Hills.