Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Woodland Hills?
Gate installation in Woodland Hills typically runs between $2,800 and $9,500 for a complete job in 2026, with most single-swing driveway gates landing in the $3,500 to $6,000 range. That figure covers the gate itself, posts, hinges, a motor if you’re adding automation, and labor. Woodland Hills properties with long driveways, hillside slopes, or custom ironwork push toward the higher end.
We give every customer a written price before any work starts. No estimates that grow once the job is open. If you want a firm number for your specific driveway or pedestrian gate, call (650) 719-7207 and we’ll schedule a site visit.
Gate Installation Cost Breakdown (2026)
Here’s what we’re seeing across Woodland Hills, from Valley Circle Estates down to the flats south of Ventura Boulevard. These are real working numbers, not national averages pulled from a database.
| Item | Low End | Typical | High End |
|---|---|---|---|
| Single swing gate (steel, no motor) | $1,800 | $2,800 | $4,200 |
| Single swing gate with motor | $3,200 | $4,500 | $6,800 |
| Double swing gate (driveway, steel) | $3,800 | $5,500 | $8,200 |
| Double swing gate with motor | $5,500 | $7,200 | $11,000 |
| Sliding gate (steel, manual) | $2,200 | $3,400 | $5,500 |
| Sliding gate with motor | $4,000 | $5,800 | $9,000 |
| Pedestrian gate (steel, no motor) | $900 | $1,500 | $2,400 |
| Gate motor only (installed on existing gate) | $1,100 | $1,700 | $2,900 |
| Wrought iron custom gate | $4,500 | $7,000 | $14,000+ |
| Wood gate (cedar or redwood, single) | $1,600 | $2,400 | $3,800 |
Two things move the needle more than anything else in Woodland Hills: the gate material and whether you’re automating it. A motor adds $1,100 to $2,900 to the bill depending on brand and existing wiring. LiftMaster and FAAC operators sit at the lower end of that range. Viking and DoorKing slide operators run higher because they’re built for heavier gates.
The second factor is site work. If your driveway has a slope, or the old gate posts are set in concrete that needs to be cut out and re-poured, that’s real labor. On hillside lots near Topanga Canyon Boulevard, we regularly spend an extra half day just getting posts plumb in ground that fights back.
What Affects Gate Installation Pricing in Woodland Hills
Here’s what actually changes your number, in order of impact:
- Gate material. Steel and aluminum run $1,500 to $4,000 for the gate alone. Wrought iron starts around $4,500 and climbs fast with custom scrollwork. Wood sits in the middle but needs more maintenance over the life of the gate.
- Automation. Adding a motor means a swing or slide operator, safety sensors, and often a keypad or intercom. Budget $1,100 to $2,900 on top of the gate itself. We work on nine gate-motor brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so the operator gets matched to what your property needs, not what’s on the truck.
- Posts and footings. In Woodland Hills, the soil varies block by block. Some areas are hard-packed clay; others near the Santa Monica Mountains have decomposed granite that shifts. Proper footings mean digging 36 to 42 inches and setting posts in concrete. Expect $400 to $900 per post when replacement is required.
- Driveway width and slope. A standard single driveway needs a 10 to 12 foot gate. Double driveways need 16 to 22 feet. Slope matters because a gate that has to swing uphill fights gravity every cycle, which means a heavier-duty operator and reinforced hinges.
- Existing gate removal and disposal. Hauling off an old steel gate and cutting out old posts adds $250 to $600. We include removal in our written quote so it’s never a surprise line item.
- Access control. Keypads, intercoms, vehicle sensors, and phone app integration run $300 to $1,800 depending on how much you want. A basic keypad is the low end. A full intercom with camera at the street is the high end.
Gate Installation Costs by Neighborhood
Woodland Hills isn’t one market. Here’s what we see in specific areas:
- South of Ventura Boulevard: Older homes, tighter setbacks, and more pedestrian gates. Typical jobs run $3,000 to $5,500. We see more gate replacements here than new installs because the original gates date to the 1960s and 1970s.
- Walnut Acres: Larger lots with wide driveways. Double gates are the norm. Expect $5,000 to $8,500 for a motorized double swing gate.
- Valley Circle Estates and hillside areas: Sloped driveways, retaining walls, and longer runs for conduit and wiring. These jobs frequently hit $7,000 to $12,000 because of the site work.
- Warner Center area and townhome communities: HOA-governed gates with specific design requirements. Budget $2,000 to $4,500 for a single gate that matches the community spec. We coordinate with HOA architectural committees regularly.
New Gate Installation vs. Replacement
If you already have a gate, a replacement costs less than a full install. You’re reusing the posts, the conduit, and sometimes the operator. A straight Pedestrian Gate replacement in Woodland Hills runs $1,800 to $4,500. A full new installation, where everything from posts to operator goes in fresh, runs $2,800 to $9,500.
The deciding question is whether the existing posts are sound. If they’re rusted at the base, cracked, or set in crumbling concrete, you’re looking at a full install whether the gate is new or not. We’ll tell you straight which one you need. Every job gets a written price before work starts, so you know the number before we touch anything.
Gate Motor Costs in Woodland Hills
If you already have a gate and just need the operator replaced or upgraded, here’s the breakdown:
- Swing arm operator (LiftMaster, FAAC): $1,100 to $1,800 installed
- Slide operator (DoorKing, Viking): $1,400 to $2,500 installed
- Heavy-duty slide operator (commercial-grade): $2,200 to $3,500 installed
- Ghost Controls or Mighty Mule retro-fit kit: $900 to $1,500 installed
- BFT or Linear articulated arm operator: $1,300 to $2,200 installed
Motor replacement on an existing gate usually takes one visit. We arrive with the operator, the brackets, and the know-how for all nine brands we service, so there’s no second trip to chase a part.
For a deeper look at what goes into a full install, see our Gate Installation in Woodland Hills page.
How to Save on Gate Installation
A few practical ways to keep the number down without cutting corners:
- Get the right operator the first time. Buying an undersized motor to save $300 means it fails in two years. We match the operator to the gate weight and cycle count. That’s the cheapest decision you’ll make.
- Choose steel or aluminum over wrought iron. Custom iron adds $2,000 to $6,000 compared to a powder-coated steel gate that looks sharp. If the iron look matters, ask about steel gates with iron-style pickets, a middle ground we install often in Woodland Hills.
- Replace the gate now, automate later. If the budget is tight, install a manual gate with pre-wired conduit. Adding a motor later is a one-day job.
- Don’t skip the site visit. Quotes over the phone are guesses. Our written estimate comes after we see the driveway, measure the opening, and check the soil. It’s free, and it prevents the “unexpected conditions” upcharge you get from companies that quote sight unseen.
Call (650) 719-7207 to schedule a free estimate at your Woodland Hills property.
Step-by-Step: What a Gate Installation Looks Like
Here’s the process we follow on every install in Woodland Hills, start to finish. No surprises, because you’ll know the steps before we begin.
Step 1: Site Visit and Written Estimate
We measure the opening, check the soil, look at the existing posts and conduit, and talk through options. You get a written price for the whole job before any work is scheduled.
Step 2: Permits and HOA Check
Woodland Hills is part of Los Angeles, and some gate projects require a city permit, especially when a new motor and electrical work are involved. If you’re in an HOA, we’ll provide the drawings and specs your committee needs.
Step 3: Post Setting
We dig the footings 36 to 42 inches deep, set the posts in concrete, and let them cure before hanging the gate. This is the step that determines whether your gate sags in five years. We don’t rush it.
Step 4: Gate Hang and Hardware
The gate goes on the posts with hinges rated for the gate weight. We check the swing arc, the ground clearance, and the latch alignment before moving to the operator.
Step 5: Operator and Safety Sensors
We mount the motor, run the wiring through conduit, and install safety sensors that meet UL 325 standards. Your gate will stop and reverse if it meets an obstruction, which is code and common sense.
Step 6: Testing and Walkthrough
We cycle the gate at least 20 times, adjust the limit switches, and walk you through the keypad, remote, and any app controls. You get the written guarantee before we leave.
Step 7: The 365-Day Done Right Promise
Every installation carries a written one-year guarantee. If something isn’t right, we come back and fix it. No charge, no argument. That’s the Garrison Standard, and it applies to every Carver Gate Repair location.
Why Woodland Hills Homeowners Choose Carver Gate Repair
Gate work in Woodland Hills sits at the intersection of two things most contractors treat as afterthoughts: metal fabrication and low-voltage electrical. Getting both right takes a specialist. That’s what we do, and it’s all we do.
Every technician we send is background-checked and uniformed. You’ll know exactly who’s walking onto your property before they arrive. Our phones are answered by a live person 24 hours a day, seven days a week, including holidays. Not a voicemail box. Not a call-back queue. A person.
Our crews operate to The Garrison Standard, the same standard that’s governed Garrison Partners companies since 2008. It means a written price before work starts, a written guarantee on every job, and a free second visit if a repair fails inside the guarantee window. Those aren’t upsells or add-ons. They’re the floor.
Lonnie Burke leads the Woodland Hills team, and the standard he holds the crew to is the same one we’ve held since day one: show up, do the job right, leave the site clean, and stand behind the work for a full year.
FAQs – Gate Installation Cost
How much does a driveway gate cost in Woodland Hills?
A motorized single driveway gate in Woodland Hills costs $3,200 to $6,800 installed. A double driveway gate with automation runs $5,500 to $11,000 depending on material, operator, and site conditions. Call (650) 719-7207 for a free written estimate on your specific driveway.
Is it cheaper to repair or replace a gate?
If the gate frame is structurally sound, repair is almost always cheaper, typically $200 to $900 for hinge replacement, weld repair, or operator fixes. If the gate is rusted through at the posts or the frame is twisted, replacement at $1,800 to $4,500 is the smarter spend. We’ll tell you which one you need after we look at it, and the inspection is free.
How much does a gate motor cost in Woodland Hills?
A new gate motor installed on an existing gate runs $1,100 to $2,900 in Woodland Hills. The spread depends on the operator, with LiftMaster and FAAC arms on the lower end and Viking and DoorKing slide operators on the higher end.
Can you install a gate the same week?
In most cases, yes. Standard single-gate installs in Woodland Hills are scheduled within 3 to 7 business days of the written estimate. Custom iron gates take 3 to 6 weeks because of fabrication time. Call (650) 719-7207 and we’ll give you a firm date on the call.
What’s included in a gate installation quote?
Our written quotes include the gate, posts, footings, hinges, operator (if applicable), safety sensors, wiring, conduit, removal of the old gate, and cleanup. Everything is itemized. Nothing is added at the door because the quote is the quote.
Do you work with HOAs in Woodland Hills?
Yes. We regularly provide specs and drawings for HOA architectural review in Walnut Acres, Warner Center townhome communities, and other Woodland Hills neighborhoods. We know what committees ask for and we submit complete packages the first time.
Get a Written Estimate in Woodland Hills
You don’t have to guess what your gate will cost. We’ll come out, measure the opening, check the site, and hand you a written price for the entire job. The number doesn’t move. The crew that shows up is background-checked and uniformed. The work carries a one-year written guarantee.
Call (650) 719-7207 to schedule your free estimate. A live person answers, day or night. From our home page, you can also see the full range of gate services we offer across Woodland Hills and the surrounding areas.
Pricing reflects the Woodland Hills market as of 2026. Carver Gate Repair Woodland Hills offers free estimates – call (650) 719-7207.
Written by Lonnie Burke, Owner at Carver Gate Repair Woodland Hills, serving Woodland Hills since 2008.
What Our Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Added a battery backup so the gate works during a power outage. Easy to use."
- Mitch L.