Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Tarzana
If your gate in Tarzana is sagging, stuck, or refusing to open, you’re likely looking at a worn hinge post, a failed limit switch on an older operator, or a safety sensor knocked out by dust and sun. Most gate repairs we handle in Tarzana run between $180 and $650, and we can usually reach homes south of Ventura Blvd or up in the hills within 90 minutes. Call (650) 719-7207 and you’ll get a live person, a straight answer, and a written price before any work begins.
Why Carver Gate Repair Woodland Hills Is Tarzana’s Preferred Gate Repair Company
Tarzana homeowners call us because the gates here are rarely simple. A mass-produced vinyl gate from a big-box store doesn’t exist on a 1960s ranch off Vanalden Avenue. What we see instead are custom wrought iron gates hung when the house was built, paired with operators that predate modern safety photocell requirements. Our Gate Repair team trains on those legacy systems specifically, which matters when the gate stops working and a generalist wants to tear everything out.
Lonnie Burke runs our operation, and he’s built the crew around one rule: write the price down, show up when promised, and guarantee the work for a full year. That’s the Garrison Standard, and it’s applied to every job in Tarzana. Reviews from Tarzana customers consistently mention two things: technicians who arrived in uniform and introduced themselves, and a final invoice that matched the written estimate to the dollar.
We schedule work across Tarzana every weekday, and our Los Angeles dispatch office keeps a technician assigned to this area during normal business hours. Emergency calls from Tarzana get routed to a live person immediately, and we can often have someone on site the same day for a stuck open gate or a motor that died overnight.
Styles & brands we work with
Wrought Iron Gate Repair in Tarzana
Wrought Iron Gate Repair in Tarzana is less about replacing panels and more about keeping the original gate on its hinges. Many of these gates were custom fabricated for mid-century estate homes, and Tarzana’s hillside setback codes make replacement complicated and expensive. Rewelding a cracked hinge or reinforcing a twisted stile often costs $250 to $500, far less than a new custom gate and permitting.
Welding and Hardware Retrofit
Older iron gates fail at the stress points: hinge barrels, latch mounts, and where the gate leaf meets the post. We cut out the cracked section, weld in new steel, and repaint to match. When a hinge post has shifted in its footing, we re-level the post and cast a new base before rehanging the gate.
Straightening and Rehanging
Santa Ana winds flex a heavy iron gate until it drags on the driveway or refuses to latch. We straighten the frame, shim the hinges, and set the reveal so the gate swings clean. The work usually costs $300 to $600 depending on how far out of true the gate has moved.
Metal Gate Repair in Tarzana
Metal Gate Repair in Tarzana covers aluminum, steel, and powder-coated gates common on Spanish-style homes west of Reseda Blvd. The most frequent issue on these gates is not the metal itself but the hardware bolted to it: rusted rollers, seized bearings, and latch strikes that no longer align. A roller replacement runs $120 to $280; a full rehang with new hardware typically lands between $400 and $800.
Roller, Bearing, and Track Work
Slide gates on Tarzana’s flatland properties depend on clean tracks and good rollers. When winter rain rusts the rollers, the gate labors and trips the motor’s clutch. We pull the gate panels, replace the rollers and bearing plates, and lubricate the track so the gate glides rather than grinds.
Post and Hinge Reinforcement
On hillside lots north of Ventura Blvd, a leaning metal gate post means the whole gate list toward the downhill side. We dig around the post, re-set it in concrete with a wedge anchor, and verify the hinge alignment before the gate is reattached. This runs $350 to $700 depending on the post and access.
Trusted Brands We Service in Tarzana
We work on LiftMaster, FAAC, and Linear operators regularly in Tarzana, and our trucks carry the common control boards, limit switches, and remote receivers for these brands. That means fewer return trips. A failed FAAC control board on a swing gate off Shirley Avenue can often be diagnosed and replaced the same day, because the part is already on the truck. For older Viking or DoorKing units still running on Tarzana hillside properties, we source parts from our supplier network and install them under the same written guarantee as everything else.
Common Gate Repair Problems We See in Tarzana Homes
- Low voltage to legacy operators. Original 1960s-era gate operators wired into aging knob-and-tube panels drop voltage during peak afternoon heat, causing swing gates to stall halfway open. We verify line voltage at the transformer and at the operator before condemning any motor.
- Hinge posts pulling free in clay soil. Tarzana’s clay soil expands and contracts with moisture, and decades of that movement walk hinge posts out of their footings. The gate sags, drags, and eventually will not close far enough to trip the safety sensor or latch.
- Rust and UV damage on slide gates. Winter rains seize rollers and hinges on iron slide gates, while failed safety photocells from year-round sun exposure cause phantom reversals. We replace the photocells, clean up the track, and often save the gate from a teardown.
- Warped wood pickets on Santa Ana wind days. The hot, dry winds flex old wood gates until pickets split and the frame twists out of square. We reframe, replace split pickets, and adjust the operator’s force settings.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Tarzana, CA
A typical gate realignment in Tarzana runs $180 to $350. Hinge and post repair costs $300 to $600 depending on the post. Electric operator repair, including limit switch or control board replacement, lands between $250 and $550. A full operator swap on a single swing gate starts around $700 and climbs to $1,400 with a heavy-duty arm and battery backup for hillside gates. Before any work starts, you’ll have a written price. It does not move. The 365-Day Done Right Promise covers every repair we make in Tarzana for a full year, and if the same issue recurs inside that window, the second visit is free. Call (650) 719-7207 for an exact quote.
We Also Serve Cities Near Tarzana
While this page focuses on Gate Repair in Tarzana, our technicians also cover Encino, Reseda, Woodland Hills, and Winnetka. If your property sits near the Tarzana line on Reseda Blvd or just up into Woodland Hills, the same crew, same written pricing, and same guarantee apply.
Serving Tarzana, CA - Our Local Coverage Area
We’re based in the Tarzana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tarzana
Yes, in most cases you can. Modern safety photocells wire into most original LiftMaster and Linear operators with a simple two-wire connection, and the cost for parts and labor runs $150 to $300. We check the control board first, because some 1960s boards lack the photo-eye input entirely, and those specific units are safer replaced than modified. If retrofitting is possible, we install the sensors, test the entrapment reversal, and document the work under the same written guarantee as any repair. Call (650) 719-7207 to have us check your specific operator.
Tarzana’s hot, dry summers pull moisture out of the wood, and gates here often see direct afternoon sun with no shade, which warps the stiles and causes the gate to bind against the latch post or drag on the driveway. Sealing all six sides of each board helps, but most warped gates need the frame re-squared or a picket or two replaced to swing true. We can also adjust the operator’s force limits so the gate completes its cycle without reversing. Estimates are free, so call (650) 719-7207 before the gate gets worse.
A loop detector is a wire buried in the driveway that senses a vehicle’s metal mass and tells the gate to open, stay open, or close safely without hitting the car. Most Tarzana homes with long driveways and older operators still use loop detectors, and when they fail, gates either refuse to open for a car or open and close at random. Replacement runs $250 to $500 including cutting the saw line, setting the loop, and tuning the detector. If your gate used to open automatically as you drove up and now just sits there, call (650) 719-7207 for a diagnosis.
Check for visible rust crust, a gate that sags more than an inch at the latch corner, or a hinge barrel that has worn oval instead of round. In Tarzana, on a hillside or flat lot with clay soil, the failure point is often the post footing, not the hinge itself. A gate leaf that jumps or drops as it turns means the hinge pin is failing. We inspect hinges, pins, welds, and post plumb for free as part of an estimate. If we tell you a hinge is unsafe, that’s a professional recommendation, not an upsell. Call (650) 719-7207 to book an inspection.
When the control board is obsolete and no longer available, the motor windings are burned, and the gearbox is scoring, a new operator is usually the cheaper answer. On a Tarzana driveway, repairing a 30-year-old unit can cost $600 to $900 in parts with no guarantee the next component will not fail next month. A new LiftMaster or FAAC operator with a written warranty and modern safety features starts around $700 installed. We’ll show you the repair price and the replacement price side by side, and you decide. Call (650) 719-7207 for an honest read on your existing operator.
Keeping Tarzana’s Original Estate Gates Working
In Tarzana, many estate-style homes retain original 1950s-70s custom wrought iron or wood gates that must be repaired rather than replaced due to strict hillside and setback codes. That means the core of local gate repair work here is skilled on-site welding, hinge retrofitting, and operator modernization, not swapping in a mass-produced gate. A gate that has hung on a Tarzana property for 60 years is part of the house. Our job is keeping it working.
On a quiet cul-de-sac off Vanalden Avenue, we restored a mid-century wrought iron swing gate at a 1962 ranch home. The LiftMaster operator had burned out from a failing loop detector, and the hinge post had shifted in its post footing after decades of clay-soil movement. We welded a new hinge post bracket, replaced the rack and pinion drive, and installed a wireless keypad entry, leaving the original gate panels and character intact. That’s the kind of repair this area needs: surgical, not wholesale.
Contact Carver Gate Repair Woodland Hills
If your gate is giving you trouble, don’t wait until it will not open at all. Call us at (650) 719-7207 for a free estimate. You’ll speak to a live person, we’ll schedule a time that works for you, and the technician will arrive in uniform with a written price before any work starts. We serve all of Tarzana, from the flats south of Ventura Blvd to the hillside properties above the boulevard. Every repair is covered by our 365-Day Done Right Promise.
Written by Lonnie Burke, Owner at Carver Gate Repair Woodland Hills, serving Tarzana since 2008.