Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Calabasas
Gate repair in Calabasas usually costs between $225 and $475 for common fixes like hinge and post work, while full automatic gate operator replacement typically runs $1,200 to $2,800 depending on the motor and access system. Most jobs in The Oaks, Mountain View Estates, and along Mulholland Highway are completed same-day or next-day because our technicians carry parts for LiftMaster, FAAC, Elite, and Mighty Mule systems on the truck. Call (650) 719-7207 and a live person answers, day or night.
Calabasas is different from most of Los Angeles County when it comes to gates. Many neighborhoods here have architectural guidelines that dictate gate style, finish, and even post cap design. That means a repair is rarely just a mechanical job. It has to look right and satisfy the HOA. Our crew understands that, and we work to The Garrison Standard on every visit: a written price before work starts, a background-checked technician in uniform, and a written guarantee on the repair, good for a full year.
Key Takeaways for Calabasas Homeowners
- Common gate repairs in Calabasas run $225 to $475; operator replacement runs $1,200 to $2,800.
- Most Calabasas HOAs require architectural approval before visible gate changes, including finish and post cap replacement.
- Santa Ana winds and clay-heavy soil are the two leading causes of gate failure in Calabasas.
- Every repair gets a written price before work starts and a 365-Day Done Right Promise in writing.
- Call (650) 719-7207: a live person answers 24/7, including weekends and holidays.
Styles & brands we work with
Why Carver Gate Repair Woodland Hills Is Calabasas’s Preferred Gate Repair Company
Calabasas homeowners call us because gate work here is not a side job for a general contractor. It is what we do every day. Our Gate Repair team focuses exclusively on gates, motors, and access systems across nine major brands, so when we arrive in Calabasas we already know the equipment on the property and the failure patterns common to this area.
Lonnie Burke leads our crew, and every technician who shows up at a Calabasas home is background-checked and in uniform. Homeowners know exactly who is walking through the gate. That matters in a community built around guard-gated entries and private security. We carry written work orders, show the price before touching a hinge, and clean the site before we leave.
We serve all of Calabasas, including The Oaks, Mountain View Estates, Calabasas Park, and the Mulholland corridor. Dispatch is coordinated from the brand’s Los Angeles office, and crews are staged locally so response to Calabasas is fast. The Garrison Standard has governed our work since 2008, and it is not a marketing slogan. It is a written promise on every job.
Wood Gate Repair in Calabasas
Wood gate repair in Calabasas typically runs $275 to $550, and the job usually starts with a sagging panel, a split stile, or a hinge that has pulled loose from the post. Many Calabasas homes use heavy solid-wood driveway gates, often paired with wrought iron accents to meet the Spanish or Mediterranean aesthetic required by local HOAs. When the wood swells after winter rain and then shrinks in summer heat, the gate changes shape and starts binding or dragging.
Structural Straightening and Reinforcement
We remove the gate from its hinges, assess the frame, and rebuild stiles and rails where rot or splitting has compromised the panel. Calabasas gates on sloped driveways carry extra load, so we reinforce corners with steel brackets before rehanging. The gate gets reset to the correct reveal so it clears the driveway surface through the full swing.
Finish Matching for HOA Compliance
If the HOA requires a specific stain or paint color, we match it before the job starts. That includes the post caps. Calabasas architectural committees have issued violation notices over a mismatched finish, so we treat the cosmetic specification as part of the repair, not an afterthought. The written price covers the structural work and the finish.
Driveway Gate Repair in Calabasas
Driveway gate repair in Calabasas runs $225 to $475 for hinge, post, and alignment work, and $1,200 to $2,800 when the automatic operator needs replacement. The most common call we get from Calabasas homeowners is a gate that has stopped opening or is grinding and reversing mid-cycle. In The Oaks and Mountain View Estates, that usually traces back to one of three causes: a failing motor that may need our Gate Motor Repair in Calabasas, a loosened hinge post in clay soil, or a control board damaged by moisture.
Automatic Operator Diagnosis and Replacement
We test the limit switches, capacitor, and gear assembly on the existing operator before recommending replacement. When a LiftMaster or Elite operator has cooked itself during a Santa Ana wind event, the fix is a new motor matched to the gate’s weight and cycle rating. We stock those operators locally for Calabasas calls, so the job does not wait on a parts shipment.
Post Resetting and Gate Realignment
Calabasas has clay-heavy soil, and after heavy rain cycles the hinge posts on driveway gates can loosen and lean. The gate sags, scrapes the driveway, and puts uneven load on the operator. We reset the post in new concrete, rehang the gate, and align the operator arm so the system runs square. This is a full-day repair when done correctly, and we quote it before we dig.
Trusted Brands We Service in Calabasas
We work on nine gate-motor brands, and in Calabasas the most common are LiftMaster, FAAC, Elite, and Mighty Mule. Our technicians are trained on each system’s control board, limit switch calibration, and entrapment protection settings. Because Calabasas has a high concentration of custom and semi-custom homes with automatic driveway gates, we keep local parts inventory for these systems so repairs move faster. If your gate has a legacy intercom or keypad tied to a community access system, we have seen it before and we interface with it directly. We do not rip out and replace what the HOA built unless replacement is genuinely necessary.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Calabasas Homes
- Overheated motors after Santa Ana wind events. Gates forced against repeated high gusts put continuous strain on capacitors and gear assemblies. We see elevated operator failures in Calabasas every fall when the winds arrive.
- Control boards shorting after winter rain. Exposed control boxes, especially older community-wide intercom wiring that was never properly weather-sealed, short out when heavy rain arrives. The gate goes dead, and the fix is a sealed replacement board and new gaskets.
- Loose hinge posts in clay soil. Calabasas soil expands and contracts through wet and dry cycles. Posts set years ago in undersized footings loosen, and the gate sags and binds against sloped driveways common in Mountain View Estates.
- HOA compliance failures on finish and post caps. A repair that uses the wrong stain, paint, or post cap can trigger an architectural violation. We document the existing finish and match it before any visible work begins.
Pricing for Gate Repair in Calabasas, CA
Here are honest numbers for the Calabasas market. A basic hinge replacement or gate realignment runs $225 to $475. A full hinge and post reset with new concrete runs $450 to $750. Wood gate repair with stile or rail rebuilding runs $275 to $550. Automatic gate operator replacement runs $1,200 to $2,800, including the motor, control board calibration, and safety sensor testing. Lock and keypad replacement runs $180 to $350. Every job gets a written price before work starts, and that number does not move at the door. Call (650) 719-7207 for a free estimate, and we will walk the gate with you before quoting anything.
We Also Serve Cities Near Calabasas
Our crews work throughout the west San Fernando Valley and Santa Monica Mountains corridor. In addition to Calabasas, we regularly serve Gate Repair in Calabasas customers in Woodland Hills, West Hills, Topanga, and Canoga Park. If you live just outside the Calabasas city line, call us, and we will confirm coverage for your street.
Serving Calabasas, CA - Our Local Coverage Area
We’re based in the Calabasas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Calabasas
Yes, in most Calabasas communities any visible change to a driveway gate requires HOA architectural approval, and that includes replacing a post cap, changing a finish, or installing a different gate panel. A like-for-like mechanical repair, such as replacing an operator or a hinge, typically does not require committee review because nothing visible changes. When in doubt, check your HOA’s architectural guidelines before scheduling, and call (650) 719-7207: we can document the existing gate before you submit your request.
It is usually the post. When a swing gate sags low enough to drag, the hinge post has most often loosened in Calabasas’ clay-heavy soil after wet and dry cycles. The panel may also be racked if it is wood and has absorbed moisture. We diagnose both on site, and the fix is resetting the post in a new concrete footing, then rehanging and re-leveling the gate. We quote the full repair before starting, and the work is covered by the written one-year guarantee.
Yes. Calabasas has many communities with legacy intercom and access control systems tied to the gate operator, and our technicians work with those interfaces directly. We replace the operator and control board without cutting you off from the HOA’s shared entry system, and we reprogram keypads and remotes to match the community’s required interface. If the system uses a loop detector or a specific visitor-call protocol, we preserve it. Call (650) 719-7207 with your HOA’s gate spec if you have it, and we will confirm compatibility before the visit.
UL 325 is the safety standard that requires automatic gates to sense an obstruction and stop or reverse before causing injury. It means your gate operator must have working entrapment protection, typically photo eyes or contact edges, and that protection must be tested after any repair. In Calabasas, where automatic gates are common and often shared by multiple homes, we test the sensors on every operator repair and replacement. It is a safety requirement, not an upsell.
Yes. Several Calabasas properties, especially larger lots without conduit to the gate, use solar-powered operators, and we service and replace them. We match the panel output to the operator’s draw and the gate’s cycle rate, and we replace batteries and charge controllers when needed. If the existing solar setup is underperforming, we will tell you what a corrected system costs before any work starts. Call (650) 719-7207 for a free site review.
Call for Gate Repair in Calabasas
If your gate is down, dragging, or refusing to open, call (650) 719-7207 now. A live person answers 24/7, including weekends and holidays. We will schedule a specific arrival window, dispatch a background-checked technician in uniform, and hand you a written price before any work starts. Every Calabasas repair carries the 365-Day Done Right Promise in writing, and if the repair fails within the guarantee window, we return free of charge. No argument, no invoice. That is The Garrison Standard.
Written by Lonnie Burke, Owner at Carver Gate Repair Woodland Hills, serving Calabasas under The Garrison Standard since 2008.